Bathrooms play an essential role in your home’s functionality, and renewing old and worn down parts is extremely important. Replacing a shower faucet by yourself may seem like one of those impossible tasks to finish without professional help, but it doesn’t need to.
With the right team behind you, giving you all of the tools you need to accomplish a successful swap, you can easily replace old, damaged, and out of style shower faucets. Keep reading to discover all of the easy steps to take before taking on your next project.
“At Arco Plumbing, we are always looking for new and better ways to help our customers when it comes to plumbing issues and inquiries from the comfort of their home.”
First things first, you need to go out and get everything you need. When it comes to your shower faucet, you want to look for functionality but also one that will blend well with the style of your bathroom to give it a distinct look. Here is what you are going to need:
We recommend that you make sure to get a shower in before the new installation because the first step is always to turn off the water. Trust us, the last thing you want is the minute you start to get soaked with a bunch of water. If you don’t have a separate valve to cut off the water to just the bathroom, you will need to cut the entire house’s water.
Now it’s time to start, so remove your old faucets. Depending on the specific faucets you currently have, some faucets can be removed by simply twisting them or unscrewing them. The process is unique to your faucet and the manufacturer, so if you are unsure, don’t just yank at it, look for the old manual or call the experts at Arco Plumbing.
Removing the valve for the old faucet is a bit trickier. During this step, you will need to cut a small piece of the drywall of the wall behind your bathroom to have room and comfortably install the new valve. You will need to drill a small hole in the wall of the bathroom. When removing the valve, there will also be a stringer mounted to it that you will need to remove.
Before installing the new valve, make sure that it is the right one for your specific bathroom set up. This step depends on whether you have two faucets, one for water and one for water, or one general faucet. You will then add the stringer and the new valve together, ensuring that the valve(s) are hanging outside of the bathroom wall at the right distance. Remember to always read and follow the new valve’s instructions as all are unique to specific manufacturers.
This step requires the use of a torch and lead-free solder. If you don’t have experience using a torch, always ask a friend who does to assist you. This step is simply called “sweating the pipes.” Apply a light coat of the solder to the ends of the pipes and inside of the valve fittings. Sometimes people opt out of using solder, so you can use simple push and lock solderless connectors.”
After adding the solder, you will need to heat the pipes’ middle to strengthen the connection. When that is done, add a small coat of solder to the joint.
The last thing you want is to put everything together and then find a leak. So take the extra time to confirm, cap the open valves and turn on the water. Take a close look at the pipes; if there is no leak, you are good to go!
Following your specific faucets’ instructions, now is the time to add that new look to your bathroom, the moment you have been waiting for. After installing the faucets securely, turn on the shower, check the pressure, and ensure no leaks are coming out of the areas around the faucets. IF everything is running smoothly, you have done it, and now you are ready to take a shower and try out your accomplishment.
Arco Plumbing is always looking for new and innovative ways to help our clients with any plumbing issues and questions that you may have. So make sure to keep checking back to learn more about common plumbing services and information that we have. If you are interested in learning about a specific plumbing topic, we guarantee that you aren’t alone. Contact Arco Plumbing today!
When you run the faucet, take a shower or flush the toilet you probably don’t consider where all the plumbing in your home is hooked up to. All of your pipes and drains hook up the main sewer line which is located outside your house.
The main sewer takes a pounding from daily use and there are many things which can gradually start to impair how effectively it operates. You may not realize this, but the sewer line that runs from your home to the main sewer in the street is your responsibility. This means that if things go wrong, it’s important to find an experienced plumber to provide plumbing solutions, especially when it comes to main sewer clogging.
If your sewer becomes completely blocked, it will be very obvious to everyone and you’ll need our emergency plumbing service. However, if you’re vigilant you could spot the warning signs and call us out before things escalate.
These are some of the most common warning signs that you could have a fault developing with your main line sewer:
Drains that regularly back up – a backed-up drain should always be seen as a warning, particularly when it occurs in the lower levels in your home. Don’t simply pour drain unblocking fluids down the plughole and hope for the best; you could cause more damage especially if the substance is too abrasive. Call Arco Plumbing out and we can get your drains running properly once more.
Multiple drain clogs – if multiple plumbing appliances are affected all around your home, it’s a sign that there’s a problem with the main sewer rather than an individual pipe.
Gurgling toilets and other plumbing malfunctions – if your plumbing fixtures are acting strangely, it could be a sign that your main sewer is developing a problem. Along with unusual noises coming from your toilet after flushing, look out for bubbling or water rising back out of the drain.
Changes in your lawn surface – main sewer lines typically run from your house and under your lawn before joining the street. If you take a close look at your lawn you may be able to spot a depression where a pipe has broken or ruptured. Providing the weather has been dry, you should also see soggy patches where the sewage is flowing out from the pipe under the ground. Not seeing either of these signs doesn’t mean there isn’t a problem.
Although the effect is the same, there are many different things which can lead to a clogged sewer line. Some of the most usual culprits include:
Any of the above problems will be sufficient to cause problems throughout the entire sewer system serving your home.
Whether your main line is just starting to develop problems or if it’s a full-blown emergency, we have the solutions you need. The action we take depends on the cause of the clog and how severe the problem is. Some of the options include:
At Arco Plumbing, our aim is always to return your main sewer to full functionality in the quickest possible time and for the lowest cost. We’ll give you a quote before carrying out the work and consult you at every step of the job.
You can’t eliminate every single clog but by following good drain hygiene rules you can dramatically cut your chances of a blockage from occurring.
Here are a few tips which can help keep your main line sewer in the best possible condition:
Sewer plumbing repair isn’t a fun job to undertake without the proper equipment and expertise, as it can be extremely messy and dirty. This is especially the case where the pipes aren’t just clogged but also damaged If you suspect there might be a problem developing with your sewer, give the friendly team at Arco Plumbing a call.
It’s better if we come out sooner rather than later as we could help to prevent expensive repairs from being carried out. Ignore a main sewer problem and you could end up with a total collapse and an emergency situation, which is a situation that no-one wants to be in. If your home is in the west suburbs of Chicagoland and you’ve got clogged drains, give Arco Plumbing in Westmont, IL a call for a swift, competitively priced service you can trust.