Hidden inside your walls and under your garden, is a maze of piping that’s responsible for carrying water and waste into and away from your home. When something goes wrong with your plumbing, it’s a race against time to get to the bottom of the issue and find a solution.
However, finding a solution to a problem you can’t see the cause of can be as difficult as it sounds. Much of what goes on inside your pipes is a complete and utter mystery and will remain so until you take a look.
A hose-mounted camera is the ultimate solution to unraveling the mystery of your plumbing and discovering what’s lurking inside the pipes that’s causing problems. Here are the five key benefits of hiring a professional plumbing contractor in Chicagoland to perform a plumbing camera inspection:
Sometimes it’s as clear as day what the problem with your plumbing is, and sometimes it’s not. There are an extraordinary number of things that can go wrong with plumbing, a large number of which have the same or very similar outward results.
Without using a plumbing camera inspection, plumbers have to rely almost solely on experience and expertise as their primary tools to diagnose a problem. This could mean that a lot of guesswork is involved in the diagnosis, possibly leading to a misdiagnosis and greater expense and disruption.
Plumbing camera inspections take all the guesswork out of diagnosing problems. Inserting the camera is easy and the plumber will have a live view of what’s going on in seconds. The plumber may be able to discover the cause of a problem in minutes, where without the camera it could have taken a lot of trial and error and a significant amount of time.
When you opt for a plumbing camera inspection, the accurate diagnosis will eliminate common mistakes and costly errors.
Can you say for certain what condition your pipes are in? Much of a property’s plumbing is not visible, which means that it can be very difficult to identify problems, let alone monitor them. A massive water leak may be on the horizon, without any evidence that something is wrong.
After a camera inspection, you’ll be able to say for sure what condition your plumbing is in. Everything could be looking great or there may be a stray tree root starting to grow through cracks in a sewage line, but at least you’ll know about it.
Plumbing camera inspections are a particularly beneficial service when purchasing a new house. Just as you’d check a new property for damp, structural problems, and insulation quality, it’s important to check the condition of the plumbing. Nobody wants to discover pipe deterioration after they purchase a property and then have to pay a fortune for repairs on top of other moving costs – it pays to know what you’re buying!
Plumbing camera inspections are normally a much better choice than the alternative. Why choose to have your garden upturned or holes cut into your walls, when you could have a small camera inserted into your drain instead!
Even if you choose the alternative, there’s no guarantee that the new hole in your garden or wall is going to be in the right spot. You may end up with a dozen more holes or an enormous hole before the plumber finds the source of the problem.
A camera inspection is faster, more accurate, and much less disruptive than digging a hole! The whole process is safe and non-invasive, so it’s going to cause less disruption to your home and your day – plumbing problems can be disruptive enough without your home being taken apart to solve them.
Prevention is perhaps the greatest benefit of plumbing camera inspections. During the inspection, the camera may reveal a number of small problems that have the potential to escalate into much bigger issues. This way, problems like clogs and corrosion can be fixed early before they have chance to become a disaster. After identifying problems, the plumber will formulate a plan for the best and most cost-effective solution – saving you time, money and stress!
The added prevention benefit of a plumbing camera inspection is highlighting things that you might be doing that are causing problems. Sometimes, the simplest of plumbing tips – like not putting grease down the sink or using a drain grate – can prevent massive problems from occurring. Your plumber can give you advice on what habits to change, so you can prevent plumbing problems in the future.
A plumbing camera inspection could end up saving you a considerable amount of money, firstly by preventing problems. If you have a pipe that’s at the end of its lifespan, then an inspection will highlight the problem before it starts leaking and your water bills skyrocket.
Speed and accuracy are two further ways that plumbing camera inspections can save you money. Not only will the inspection reduce the time it takes to diagnose a problem and eliminate the need for multiple inspections, but it prevents a misdiagnosis costing you a significant sum on unneeded work.
You’ll also get the reassurance that the problems you’re paying to fix actually exist. You’ll be able to view the live video feed of the camera in action and get an insurance report after the inspection if required.
If you want to know with absolute certainty want’s going on inside your plumbing, then Arco Plumbing are the local contractors to call. We can give you peace of mind about the condition of your pipes, get to the bottom of problems quickly to save you time and money, and provide you with plumbing tips based on any problems we discover.
Don’t let the inside of your pipes remain a mystery, Contact Arco Plumbing today, and see what a camera inspection can reveal about your plumbing!
In areas where basements are at risk of flooding or serious damp problems, sump pump installation can be essential. A sump pump is designed to reduce the chances of flooding, water damage, and problems with mold, mildew, damp, and musty odors caused by excess water getting into basements. Sump pumps are installed in sump pits, which are holes dug into the lowest part of a property. The pumps are only small but are often responsible for moving large volumes of groundwater or rain.
You may have a larger pump installed if your home is at serious risk of flooding, or a smaller one if the risk is lower. The pump may be a pedestal sump pump, where the motor is located above the water level, or a submersible sump pump, which is submerged under water.
Knowing how to identify and prevent problems with your sump pump is crucial. By understanding what can go wrong with the pump, you can ensure that it continues to function properly, and your basement doesn’t experience the problems that the pump is in place to prevent!
When a sump pump loses power, flooding can be quick to follow, especially if the power outage occurs during a storm. Thankfully, this potential disaster is quite easy to prevent!
If you have a home backup generator, then the sump pump should continue working normally once the generator kicks in. If you don’t have a home backup generator and don’t want to install one, then you could install a battery backup sump pump or a water-powered backup sump pump.
Battery backup pumps are the most versatile of the two options, but if your home has the right plumbing system, water-powered backup pumps can last much longer, and you won’t need to monitor the battery.
Power surges caused by problems like lightning storms and damage to utility poles, may result in your sump pump experiencing an electrical failure. If this occurs, then having a backup power source isn’t going to be enough to get the pump working again.
To prevent electrical failures caused by power surges, you can contact your local plumber and ask them to install a service entrance surge protection device.
A sump pump running continuously may not sound like a disaster, but there’s a chance that pump will overheat and eventually burn out if there isn’t any water to cool the system down.
This problem is often the result of the float switch on the pump becoming jammed in the ‘on’ position, instead of lowering as the water does and turning the system off. To fix the problem and help to stop it happening again, simply free the switch and replace it if damaged. You can then attach it to the pump, making sure there are no obstructions.
If the float switch isn’t jammed, then the pump may have a defective check valve, the pump could be the incorrect size or in the wrong location, there could be a sewer leak beneath your basement, or your home could be higher than the water table line. If you’re unsure of the exact problem, it’s best to contact a plumber, who’ll be able to inspect the check valve and assess the pump.
If your sump pump is no longer removing water effectively, then dirt or debris may be blocking the drain pipe. The blockage should be fairly easy to remove using a plumber’s snake and a high-powered hose pipe. Once the drain pipe is clear, you can reduce the chances of clogging by installing a grate.
An overwhelmed sump pump is a serious flood risk! To prevent flooding in your basement, you may require a replacement pump that has enough power to keep up with the volume of water coming in. If you’re concerned that your sump pump is overwhelmed, a plumber will be able to design a suitable system for your home that can handle typical water volumes for your area.
The best way to prevent the many disasters that can arise from a poorly maintained sump pump is to stay on top of pump maintenance or call in an expert to inspect the system every year.
Inspecting the pump for signs of abnormalities, damage, and debris, and testing the system regularly to make sure that everything is working, are simple ways to prevent maintenance problems. Installing a backup pump and a high water alarm will also help to keep you informed of problems.
If your basement is being flooded because there’s too much water in the sump pump, then the chances are, you either live in an area with a high water table or your home is on top of a spring. In these instances, there are two common solutions: call a plumber to install a second pump or raise the existing sump pit.
The common cause of a lack of water in a sump pit is a fault with the drain tile. The drainage system channels water into the sump pit, so if no water is in the pit, there may be a clog in the system, or it may not have been installed properly. An effective way to fix and prevent this problem is to make sure the system is installed correctly and is in good working order.
If you’re ever in doubt about the health of your sump pump and whether it’s working properly, it’s important to contact Arco Plumbing as soon as possible. Problems with sump pumps can spell disaster for your basement and the rest of your home, so never delay in calling for help if you think that there’s a problem or a way to improve the system!